EMT Practice Test

1. Question Content...

---

Question1: A VMware vSphere 6.x Administrator is looking at the following output from esxtop on an ESXi host:

What does DAVG/cmd represent?

Question2: The Triggered Alarm on the VM shows Virtual Machine Consolidation needed status.
How would an administrator recover from this event?

Question3: Which three features can be configured during the initial creation of a cluster? (Choose three.)

Question4: A vSphere Administrator has been tasked with ensuring that 500 virtual desktops are unable to communicate with one another, but can communicate with required services.
Which two solutions does VMware recommend? (Choose two.)

Question5: A VM has the following configuration:
2 vCPU

4 GB RAM

HDD1 10 GB

HDD2 20 GB

A vSphere Administrator creates a snapshot of a powered off VM.
What is the maximum size of all of the snapshots that can be consumed on the datastore?

Question6: A vSphere Administrator notices that they cannot login to vCenter Server with the vSphere Web Client, although the server is responding to pings.
What is the next step in troubleshooting the login problem?

Question7: A VMware vSphere 6.x Administrator is creating an Alarm Action.
What are three configurable actions? (Choose three.)

Question8: A VMware vSphere 6.x Administrator is tasked with configuring vRealize Log Insight.
What three ports can be used for syslog? (Choose three.)

Question9: Which two choices are valid ways to patch an ESXi host? (Choose two.)

Question10: A VMware vSphere 6.x Administrator has been tasked with enabling the Integrated Load Balancer for the new vRealize Log Insight cluster.
What three options are required before the Integrated Load Balancer can be used? (Choose three.)

Question11: A virtual machine loses network connectivity after vMotion.
Which two troubleshooting tasks can be performed? (Choose two.)

Question12: Which two options does VM Monitoring use to determine if a virtual machine should be reset? (Choose two.)

Question13: Which two statements are true when configuring a virtual flash resources (vFlash)? (Choose two.)

Question14: When managing search queries in vRealize Log Insight, what three actions can be performed? (Choose three.)

Question15: Which file format supports the exchange of virtual appliances across products and platforms?

Question16: One of your virtual machines 9VM) has performance issues and sometimes in unresponsive.
Which VM file must be checked in order to find the root cause?

Question17: VM Components Protection (VMCP) can provide automated recovery for which two virtual machine failures? (Choose two.)

Question18: What is the VMware recommended way to distribute storage I/O loads across multiple paths to minimize downtime and remove potential bottlenecks?

Question19: Which two resource types can be limited on the vApp level? (Choose two.)

Question20: A vSphere Administrator notices that the newly deployed ESXi hosts cannot stay in a connected state in vCenter Server for more than 60 seconds at a time. The Administrator knows that the hardware is in good health and that the ESXi hypervisors are properly configured.
What is the source of the problem?

Question21: What is the maximum supporter number of vCPU per VM in VMware vSphere 6.5?

Question22: What two utilities provide a VMware vSphere 6.x Administrator a detailed look at how ESXi uses resources in real time? (Choose two.)

Question23: What is true about a virtual machine with (orphaned) appended to the display name?

Question24: An ESXi host has limited network connectivity.
What three troubleshooting steps can a vSphere Administrator take? (Choose three.)

Question25: Which is a valid requirement for deploying the vCenter Server Appliance 6.x to a DRS cluster?

Question26: What two options are available when configuring a virtual flash resource on a virtual machine? (Choose two.)

Question27: What tool is utilized for detailed performance monitoring of the vCenter Server Appliance?

Question28: When trying to export the vApp to the OVF, the option is grayed out.
What solution allows for the export of a vApp?

Question29: A vSphere Administrator notices that sometimes they receive poor network throughput for multiple port groups that reside on a vSwitch with multiple physical uplinks (vmnics). The configuration on the ESXi host is identical to other hosts that are working properly in the same cluster.
What should be done next?

Question30: Which is the VDP appliance available storage configuration maximum?

Question31: What two scenarios will prevent extending a VMDK that is attached to a powered on VM? (Choose two.)

Question32: What two files are created when the Take snapshot operation is executed? (Choose two.)

Question33: Which virtual SCSI controller would be recommended when deploying a Windows Server 2012 R2 VM that will host a database server which is expected to generate high I/O?

Question34: Which two choices are valid ways to patch an ESXi host? (Choose two.)

Question35: Which key combination will let a vSphere Administrator revert to the previous version or build of ESXi?

Question36: What two new features are introduced with virtual machine compatibility version 13? (Choose two.)

Question37: Which two options are available when migrating a powered off VM and relocating the attached disks?
(Choose two.)

Question38: What three steps are necessary to enable Jumbo Frames for use with an iSCSI storage array? (Choose three.)

Question39: A vSphere Administrator has been tasked with configuring Jumbo Frames and the current environment is based on vSphere Standard Switch.
Which three steps are required?

Question40: Some of the VMs in a vSphere DRS cluster are not migrated as expected.
Which three factors can affect DRS behavior? (Choose three.)

Question41: A VMware vSphere 6.x Administrator is implementing a new eight-node cluster for business critical applications. Each server will be configured with two 10 GbE network adapters and will utilize iSCSI for storage on one subnet.
Which feature is required to implement this solution?

Question42: Which two statements are Datastore Cluster requirements? (Choose two.)

Question43: Which two network failure detection options are available when using a vSphere Standard Switch?
(Choose two.)

Question44: Which statement is a requirement for Storage vMotion?

Question45: A vSphere Administrator recently upgraded to vSphere .6.5 and wants to assign more than 4 TB of RAM to the virtual machine.
What must happen first?

Question46: Which two statements are correct when licensing an ESXi 6.x host? (Choose two.)

Question47: A vSphere Administrator recently introduced a new shared storage solution for the ESXi hosts. Despite good device specifications, this new storage solution is not performing well.
What are two VMware-recommended troubleshooting steps for fixing this? (Choose two.)

Question48: A vSphere Administrator attempts to remove a host from a vSphere distributed switch, and fails. There is a notification that resources are still in use.
What are two possible causes? (Choose two.)

Question49: Which three object types can be stored in the Content Library? (Choose three.)

Question50: VMware vRealize Log Insight can be configured to send notification events to which endpoint?

Question51: When adding a new VLAN to an existing virtual distributed switch, which three steps are necessary?
(Choose three.)

Question52: A vSphere Administrator wants to enable Storage I/O Control. There is a mix of VMFS and NFS datastores. All of the VMFS datastores have hardware acceleration enabled. The Administrator attempts to create a new datastore cluster but is unable to add all of the datastores to the cluster.
What is the problem?

Question53: Which two options are requirements to perform a migration between vCenter Server instances? (Choose two.)

Question54: A vSphere Administrator notices that a virtual machine is performing poorly, and upon investigation has observed the following:
The quest operating system does not appear to be utilizing the resources that have been assigned to it.

The ESXi host has many other VMs present and utilization is high.

What is the first step in troubleshooting this problem?

Question55: Which two databases are supported for the vCenter Server Appliance 6.x? (Choose two.)

Question56: A VMware vSphere 6.x Administrator is tasked with expanding a current vRealize Log Insight Deployment.
What two steps will accomplish this task? (Choose two.)

Question57: What is the maximum supported number of Virtual SCSI adapters per VM in vSphere 6.5?

Question58: Which three methods can a vSphere Administrator use to automatically synchronize time on an ESXi host?
(Choose two.)

Question59: What are two requirements needed to enable a 4vCPU virtual machine with Fault Tolerance? (Choose two.)

Question60: Which option is true during a virtual machine cold migration?

Question61: Which option was added to the load balancing calculations of DRS in vSphere 6.5?

Question62: What is the maximum supported RAM per virtual machine (VM) in vSphere 6.5?

Question63: What are two uses of the vRealize Log Insight Agents for Windows and Linux? (Choose two.)

Question64: A VMware vSphere 6.x Administrator sees the following output in esxtop:

What does the %RDY column represent?

Question65: Which three functions are provided by Storage DRS? (Choose three.)

Question66: Which two options can change the thin provisioned disk to thick provisioned? (Choose two.)

Question67: Which three IP addresses may be pinged by the Test Management Network feature in the ESXi hosts DCUI? (Choose three.)

Question68: Which of the following are valid iSCSI adapter types for vSphere? (Choose three.)

Question69: Which are two requirements for vMotion without shared storage? (Choose two.)

Question70: A Long-Distance vMotion migration cannot complete.
Which three situations could cause this? (Choose three.)

Question71: ESXi supports which three iSCSI adapters? (Choose three.)

Question72: After enabling iSCSI port binding on ESXi hosts, a vSphere Administrator can no longer reach an iSCSI Array Target from the configured software iSCSI initiators. Which can be the root cause for the failure?

Question73: What are two valid states for Compliance Status in VM Storage Policy? (Choose two.)

Question74: Which password meets the default password requirements in ESXi 6.x?

Question75: Which two choices would make a Virtual Machine compatible when enabling Fault Tolerance? (Choose two.)

Question76: What three shares are available when configuring a Resource Pool? (Choose three.)

Question77: What are the correct steps to migrate the storage of a virtual machine?

Question78: ESXi 6.x can be installed upon which three supported hardware configurations? (Choose three.)

Question79: Which three options are available for remediation with Proactive HA? (Choose three.)

Question80: An Administrator would like to take advantage of the new Automatic UNMAP feature in VMFS6. All of the existing datastores are connected via iSCSI and formatted with VMFS5.
In order to minimize disruption and maintain some of the existing VMFS5 volumes, which two steps can be taken to leverage the UNMAP feature in VMFS6? (Choose two.)

Question81: Which three actions are available in Troubleshooting Mode in the ESXi Direct Console User Interface (DCUI)? (Choose three.)

Question82: A vSphere Administrator has stated that currently Private VLAN is utilized to prevent cross-talk on the dedicated backup network.
What two actions are required to implement Private VLAN in VMware vSphere? (Choose two.)

Question83: Which actions take place when DRS Automation is set to Partially Automated?

Question84: What are two valid iSCSI discovery methods? (Choose two.)

Question85: What two virtual hardware devices can be added to a powered on VM? (Choose two.)

Question86: A vSphere Administrator notices that upgrading VMware Tools on a single VM fails. Upon closer inspection, the summary tab shows that the VMware Tools status is unmanaged.
What is true about this virtual machine?

Question87: Which three factors should an Administrator take into account when determining the required VDP appliance size and number of appliances? (Choose three.)

Question88: Which three actions are available in Troubleshooting Mode in the ESXi Direct Console User Interface (DCUI)? (Choose three.)

Question89: A vSphere Administrator sees the alarm:
vSphere HA virtual machine failed to failover
This occurred for a number of virtual machines on a particular ESXi host in a cluster with vSphere High Availability (HA) enabled. The virtual machines guest operating systems never reported a power event.
What happened?

Question90: Which two options can be leveraged to configure a remote syslog server for an ESXi 6.x host? (Choose two.)

Question91: What are two requirements needed to enable a 4 vCPU virtual machine with Fault Tolerance? (Choose two.)

Question92: A Primary Fault Tolerant VM is performing poorly despite its ESXi host having adequate resources and CPUs are idle. Other hosts in the cluster are much more heavily utilized.
What is the cause?

Question93: A vSphere Administrator just finished installing new software on the Windows vCenter Server and notices that vCenter Server services no longer start properly.
What two tasks should be done next? (Choose two.)

Question94: After reconfiguring VUM in the vCenter Server Appliance, a vSphere Administrator must restart the Update Manager service.
Which VMware recommended action will let the Administrator accomplish this task?

Question95: When a vSphere Administrator powers on a VM with the following configuration, what will be the resulting swap file size?

Question96: By default, how many login attempts will an ESXi host allow before locking out the account?

Question97: A vSphere Administrator wants to migrate a virtual machine from a host with an AMD Opteron CPU to an intel Xeon CPU.
Which method should be used?

Question98: What will happen to the VM when a vSphere Administration returns to a snapshot that was created without memory on the running VM?

Question99: Which three options are available when applying a Customization Specification to an existing virtual machine? (Choose three.)

Question100: Which Distributed Switch Load Balancing option requires configuration of the physical Ethernet switch to operate properly?

Question101: Virtual machines do not power on after completing the clone or deploy from template workflow in the vSphere Web Client.
What two solutions will fix this problem? (Choose two.)

Question102: What are two requirements for Guest Operating System Customizations? (Choose two.)

Question103: A vSphere Administrator notices that one of the virtual machines has been configured for VMDirectPath I/ O, and a physical NIC has been assigned to the VM.
What feature is not available to this VM?

Question104: What three steps are necessary to configure Virtual Volumes (vVOLs) on an ESXi hosts? (Choose three.)

Question105: Which two options can be used for vCenter Server 6.x database availability? (Choose two.)

Question106: Which virtual switch load balancing method should be used when teaming network interfaces with EtherChannel?

Question107: Which three virtual hardware configurations will allow snapshots? (Choose three.)

Question108: What is required to create a vSphere Distributed Switch? (Choose two.)

Question109: What three steps must be taken when removing a host from a vSAN-enabled cluster? (Choose three.)

Question110: A vCenter Server displays this error for a single host:
Virtual machine creation may fail because agent is unable to retrieve VM creation options from the host Which action will allow a vSphere Administrator to resolve the issue?